2018 Jeep Wrangler JK
Mileage
66,042
Service Date
12/9/2024
Services Performed
- PULLED CODES FROM VEHICLE. CODE OF P06DD "ENGINE OIL PRESSURE CONTROL CIRCUIT STUCK OFF." OIL PRESSURE SENDER IS ON THE OIL FILTER HOUSING. OIL PRESSURE AT THE VVT IS GOOD INDICATING THAT THE OIL PUMP IS WORKING. OIL PRESSURE SENSOR HAS MOST LIKELY FAILED. OIL FILTER HOUSING LEAKING AND SHOULD BE REPLACED WHEN SERVICING PRESSURE SENSOR. VEHICLE IS OVERDUE FOR OIL CHANGE.
- Test drive vehicle. Inspect for leaks. Remove pan (if possible) from transmission. Replace and/or clean filter/screen. Adjust bands as necessary, if possible. Re install pan with new gasket and fill with proper fluid. Check level and check for leaks.
- OIL FILTER ADAPTOR GASKET – Remove & Replace – Housing – [Includes: R&I Intake Manifold Gaskets.]
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
DANIELLE M. gave our service a 5 star review on 12/13/2024
